Electrodepot 30 Amp 3 Pole Normally Open IEC 660V Contactor, Auxiliary 1NO/1NC – 110/120VAC Coil, Inductive 32A, Resistive 50A with Mounting Base for DIN Rail 



BUY NOW
  • INDUSTRIAL QUALITY COMPONENTS – Pack of 2 30Amp 3 Pole Normally Open (NO) Ballast Contactors for home and industrial uses, with 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts. Compatible with 35mm DIN rails. Comply with IEC/EN standards for consistent and reliable installation. Suitable for 6-pole connections
  • APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters; and AC-3 for air conditioners, compressors or fans
  • FULL AMP LOAD – Inductive/Motor Load: 32Amp. Resistive/Incandescent Load: 50Amp. Power Lug Terminal Capacity AWG # 4
  • COIL VOLTAGE AND LOAD – Voltage: AC 110V/120V, 50/60Hz. Load: 70VA Inrush and 7.5VA Sealed
  • DIMENSIONS (approx.) – 56.4 x 88.9 x 88.9 mm / 2.22'' x 3.50'' x 3.50'' (Width x Height x Depth)

  • Product description

    Pack of 2 30 Amp 3 Pole Normally Open IEC 660V Contactors for home or industrial uses. Perfectly compatible with DIN rail mounting.
    It features 1 Normally Open and 1 Normally Closed auxiliary contacts. With applications in lighting, motor and switching.

    Technical Specifications:
    – Contactor 660V
    – Contactor Type IEC
    – Full Load Amps-Inductive 32
    – Full Load Amps-Resistive 50
    – Number of Poles 3
    – Coil Volts: 120VAC
    – Hz 50/60
    – Action: Non-reversing
    – Enclosure Type Open
    – Auxiliary Contact Form 1NC/1NO
    – Coil inrush 70VA, Sealed 7.5VA
    – 2 HP @ 1 Phase - 120V
    – 5 HP @ 1 Phase - 230V
    – 10 HP @ 3 Phase - 208V
    – 10 HP @ 3 Phase - 230V
    – 20 HP @ 3 Phase - 480V
    – 30 HP @ 3 Phase - 575V
    – Standards CE
    – Base or DIN 35mm mount

    Wiring:
    Solid Conductor: 25 mm2 Max torque 0.6 Nm
    Stranding Conductor: 16 mm2, Max torque 0.6 Nm

    Compliance:
    CSA C22.2 No. 14, EN 60947-4-1, EN 60947-5-1, IEC 947-2, IEC 60947-4-1, IEC 60947-5-1, UL 508